REIMAGE Carbonless Laser Paper

  • slide3
  • slide1
  • slide2
  • slide4
  • 1
  • 2
  • 3
  • 4

Cost-Effective Solution for Creating Multi-Part Forms

Environmentally Friendly Carbonless Laser Paper

  • Cost-Effective
  • Works on Every Machine

REIMAGE™ carbonless or NCR laser paper is a cost-effective, environmentally-friendly, laser-compatible solution that enables you to create and print customizable carbonless business forms, invoices, statements, receipts, or extra copies quickly and easily—with savings of up to 50 percent. Stop using those old pin-fed forms and printers - upgrade to a laser printer with REIMAGE from Relyco!

buttons buynow   request

1-800-777-7359 or This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Details
  • Application Ideas
  • Literature
  • Make Carbonless Forms
  • View Samples
  • Specifications

Cost-effective, environmentally-friendly, carbonless laser paper - works on all machines

From purchase orders to invoices, statements to shipping forms and more, REIMAGE carbonless laser paper is a cost-effective, environmentally-friendly, forms solution that—when combined with easy-to-use software from Relyco—ensures a smooth transition from traditional, expensive carbonless forms to a customizable format that is affordable and efficient to produce. protection-formsFire Protection Forms school-formsSchool System Form In fact, businesses are achieving up to 50 percent savings when they create custom REIMAGE forms for use in their operations, a benefit of converting from complicated processes using the old continuous carbonless forms to the new REIMAGE laser carbonless solutions found exclusively from Relyco.

How REIMAGE Carbonless Paper Works

Since a laser printer can only print a single sheet at a time, with REIMAGE carbonless laser forms, a user prints multiple copies of the same form and then collates them once printing is complete. For a three-part form, for example, a user programs printing software to print three copies of each form, one after the other, on the carbonless laser paper (With a three-part form, the top sheet is white, the middle sheet is canary, and the bottom sheet is pink).

Once they’ve been printed, the forms may be stapled, bound or glued into sets, or left as is, without any binding. For more info see Carbonless Forms in 4 Steps. or our Carbonless forms Expertise Center

Up to 50% Savings Using REIMAGE

Between 30 and 50 percent of preprinted forms are thrown away within 6 to 12 months due to obsolescence caused by a change in the form or the business processes. REIMAGE carbonless blank form solutions eliminate this waste; users customize and print only what is needed, when it is needed. Unlike traditional carbonless paper, which is manufactured with solvent-based chemicals that can damage critical printer components, REIMAGE carbonless laser paper is manufactured specifically for use in nearly every machine—including laser, offset press, high-speed copiers and digital duplicators—and will not damage printing equipment or the environment.

  • Cost effective, carbonless, laser compatible; convert continuous carbonless forms into a laser format quickly and easily—for savings of up to 50 percent
  • REIMAGE runs on every machine, including laser, offset press, high-speed copiers and digital duplicators; will not damage printing equipment
  • Certified environmentally friendly; earned prestigious
  • REIMAGE has Sustainable Forest Initiative Chain-of-Custody forest certification, which ensures that each sheet of REIMAGE is responsibly produced
  • REIMAGE is available in a range of options, including pre-collated and uncollated sheets for 2-, 3- or 4-part forms

REIMAGE is available in a range of formats to meet unique requirements

REIMAGE is available in a range of formats to meet the unique requirements of your organization ― including printer compatibility. REIMAGE carbonless laser paper is available pre-collated for single-tray use or uncollated for use in multiple tray (or even multiple printer) applications. Choose 2-, 3- or 4-part forms, from white/canary to white/canary/pink/goldenrod. Because each application is unique, physical testing of REIMAGE carbonless laser paper using the actual laser printer and laser printer trays on which the forms will be printed is the most effective way to determine which REIMAGE option is right for you.

Relyco’s certified print consultants can work with you to help streamline your current forms use. Many of our customers realize significant savings of both time and money when discovering their 4- or 5-page form can easily be reduced to a 2- or 3-part REIMAGE carbonless solution for better business operations.

Relyco’s certified print consultants can work with you to help streamline your current forms use. Many of our customers realize significant savings of both time and money when discovering their 4- or 5-page form can easily be reduced to a 2- or 3-part REIMAGE carbonless solution for better business operations.

REIMAGE is “Clean” and “Green”

As a leader in specialty papers and business printing solutions, Relyco is dedicated to providing the most environmentally responsible products available. REIMAGE carbonless paper has earned the prestigious Sustainable Forest Initiative Chain-of-Custody forest certification, which ensures that each sheet of REIMAGE carbonless laser paper is responsibly produced.

buttons buynow request

Common Carbonless Laser Paper Applications

REIMAGE Carbonless Laser Paper is an environmentally-friendly, cost-effective, laser-compatible carbonless paper solution ideal for converting continuous carbonless forms to a laser format. Unlike traditional carbonless paper, which is manufactured with solvent-based chemicals that can damage critical printer components, REIMAGE Carbonless Laser Paper is manufactured specifically for use in laser printers and digital copiers.

Carbonless laser paper can be used across multiple industries in a range of applications, including:

  • Quotes
  • Purchase orders
  • Invoices
  • Legal forms
  • Delivery forms
  • Medical forms
  • Insurance forms
  • Proposals
  • Employment applications
  • Sales receipts
  • Requisition forms
  • Tracking manifests
  • Contracts

To learn more about REIMAGE carbonless laser paper from Relyco, Call 1-800-777-7359 or Email This email address is being protected from spambots. You need JavaScript enabled to view it. .

Brochure

brochure

Other Literature

4 Easy Steps to Creating REIMAGE Carbonless Laser Forms

Relyco offers both STRAIGHT and REVERSE collated REIMAGE sets for your laser, offset, digital printer or copier. Your Relyco account representative can help you quickly determine the correct collation you need or you can use the “Determining Collation Sequence” steps below. These steps will ensure you print your REIMAGE forms correctly.

  • It is critical to load REIMAGE into your printer or copier in the correct order for any written correspondence to transmit from the top sheet to subsequent page(s).
Determining Collation Sequence
  • Mark two sheets of plain printer paper as Page 1 and Page 2
  • Load the marked sheets into the printer feed tray FACE UP
  • Send 2 copies of a one-page document to the printer
  • Remove pages from output tray without disturbing the sheet sequence
  • If the sheet marked as Page 1 is on the top, then you want to use STRAIGHT collated REIMAGE sets
  • If the sheet marked as Page 2 is on the top, then you want to use REVERSE collated REIMAGE sets
  • If the image was printed on the blank side of the marked sheets, then you need to load the REIMAGE sets into the feed tray FACE DOWN. In this case, you may want to run the procedure again to verify correct collation.
STEP 1 Print on the “Face of Document” side only

REIMAGE testing packs are clearly marked STRAIGHT or REVERSE collated with the first sheet marked “Face of Document.” After you have determined the collation sequence of your printer, load the precollated paper correctly so that your printer prints on the “Face of Document” side.

STEP 2 Print the correct number of sheets

Just as you print any other document, you must print carbonless laser paper one sheet at a time. For 2-part forms, you print two copies. For 3-part forms, you print three copies. i.e. when printing ten 3-part forms, you print your one-page document 30 times to create ten 3-part forms.

STEP 3 Verify the sheet order

If you determined the correct collation and printed on the “Face of Document” side, you have successfully printed your REIMAGE form (3-part form sequence: white, canary, pink).

STEP 4 Staple, clip, or glue your forms

REIMAGE forms can then be stapled, paper clipped, or glued to create your form sets. REIMAGE works by applying physical pressure and contact through the sheets. Use a firm writing style and a ballpoint pen for best results. REIMAGE forms can then be stapled, paper clipped, or glued to create your form sets. REIMAGE works by applying physical pressure and contact through the sheets. Use a firm writing style and a ballpoint pen for best results.

How to Glue REIMAGE Laser Carbonless Paper into Forms

weight
I. Weight

With the exception of the top sheet, all other parts of the set must have a toner-free margin at the gluing edge of at least 3mm. This will ensure problem free gluing. Collated sets should be carefully jogged to produce a perfectly smooth gluing edge. This will allow for even glue penetration of the REIMAGE glue into the coatings. The forms should be handled carefully to avoid damage from excess pressure.

  • It is recommended to carry out a trial on a small stack of forms to establish the suggested amount of adhesive application and the correct drying time.
brush
II. Brush

The stack height for gluing should not exceed 30 cm and a waterproof board should be placed on top. A weight of 1-2 kg is also recommended.

Shake the REIMAGE Carbonless Fanapart Adhesive before use and pour a small amount of adhesive into a small non-metalic container. The glue should be applied generously with a 2” soft bristled brush using horizontal strokes until the gluing edge is uniformly glossy.

dry
III. Dry

We do not recommend the use of heaters to accelerate drying. Separation of the sets should be carried out by lateral sliding of the sets. This separation should take place after 30 minutes.

Drying/bonding is complete after 2-3 hours after gluing. The forms are now ready for use.

  • To ensure the correct functioning performance of REIMAGE Laser Carbonless Paper, it should not be mixed with other REIMAGE paper.

To order, call your Relyco representative at 1-800-777-7359.
Visit us online at www.relyco.com for more information.

Download PDF version of Instructions
REIMAGE
Methuen Schools
Sample
REIMAGE Sample
of NH State Fish &
Game License
Carbonless Form
and Integrated ID
REIMAGE Sample
of RI Fire Dept.
Integrated Label
Carbonless Form
   
 Product #
 Description  Color/Collation
 RE811SR2  2 Part Reverse 11” Carbonless Laser Paper  Canary/White
 RE811S3  3 Part Straight 11” Carbonless Laser Paper  White/Canary/Pink
 RE811R3  3 Part Reverse 11” Carbonless Laser Paper  Pink/Canary/White
 RE811S4  4 Part Straight 11” Carbonless Laser Paper  White/Canary/Pink/Goldenrod
 RE811R4  4 Part Reverse 11” Carbonless Laser Paper  Goldenrod/Pink/Canary/White
 RE811CFB-WT  1 Part CFB 11” Carbonless Laser Paper  White
 RE811CFB-CA  1 Part CFB 11” Carbonless Laser Paper  Canary
 RE811CFB-PK
 1 Part CFB 11” Carbonless Laser Paper  Pink
 RE814CFB-WT  1 Part CFB 14” Carbonless Laser Paper  White
 RE811CB-WT  1 Part CB 11” Carbonless Laser Paper  White
 RE811CF-CA  1 Part CF 11” Carbonless Laser Paper  Canary
 RE811CF-PK  1 Part CF 11” Carbonless Laser Paper  Pink
buttons buynow
1-800-777-7359
Request Samples
Live Chat

REIMAGE FAQ's

Q:  Will a set of my laser carbonless paper run through my printer all at the same time?

A:  No, our REIMAGE carbonless paper runs through your laser printer one sheet at a time. If needed, the carbonless paper can then be bound together using our special glue.

Q:  Which laser carbonless forms should I use?

A:  The choice between 2 part carbonless paper, 3 part carbonless paper or 4 part carbonless paper boils down to how many copies of your form you need. Many customers who have been using as many as 4 or 5 pages for years find that they can consolidate their use to a 2-part carbonless paper or a 3 part carbonless paper and save a significant amount of money. Call our Relyco Consultants for suggestions on what you may depending on your individual usage. Q:  Is REIMAGE a type of NCR paper?

A:  Yes, NCR paper is the same thing as laser carbonless paper. NCR carbonless paper is simply another name, an acronym stemming from “No Carbon Required”. The key is that our REIMAGE NCR carbonless paper is specifically designed for your laser printer. It will not damage it as many other non-laser carbonless paper products will.

REIMAGE Gallery